Product introduction

This product is made of high-quality EVA and LLDPE resin as the carrier, adding high-efficiency additives such as short-term and long-term dripping agent and high-quality heat preservation agent, and refined by advanced internal mixer. The long and short effect flow drops can make the film form a uniform and transparent water film on the surface, which can increase the light transmittance and avoid water drops; The compound heat preservation agent can prevent the temperature in the shed from falling too fast at night and make the temperature in the shed 1 ~ 3 ℃ higher than that of the ordinary membrane.

Product features

1. Drip proof for more than 3 months.
2. Heat preservation: a certain amount of heat preservation agent is added to the masterbatch to achieve the effect of heat preservation. The temperature in the shed can be increased by 1-2 ℃ at night.
3. The film has high transparency.

Technical parameter

Product application

1. Suitable for PE, EVA greenhouse film and plastic film;
2. Recommended addition ratio: 10%.

Packaging and storage

Packaging: 25 ± 0.1kg/bag, moisture-proof paper plastic composite bag,
Storage: the storage period is one year, and pay attention to moisture protection.
Note: if it is used after one year, first test whether it absorbs moisture. Drying after absorbing moisture will not affect the effect.