+
  • 101.jpg

Anti dripping/aging MB

This product takes high-quality EVA and LLDPE resin as the carrier, adds long and short effect flow drops, imported light stabilizer, ultraviolet absorber, antioxidant and high-efficiency compound insulation agent, and is refined by imported advanced internal mixer. Compound UV can make the film have excellent anti-aging properties; The long and short effect flow drops can make the film form a uniform and transparent water film on the surface, which can increase the light transmittance and avoid water drops; The compound heat preservation agent can prevent the temperature in the shed from falling too fast at night and make the temperature in the shed 1 ~ 3 ℃ higher than that of the ordinary membrane.


Category

Agricultural Film Masterbatch

Contact Us

Description

Anti dripping/aging MBZY-03102

1、 Product introduction

This product takes high-quality EVA and LLDPE resin as the carrier, adds long and short effect flow drops, imported light stabilizer, ultraviolet absorber, antioxidant and high-efficiency compound insulation agent, and is refined by imported advanced internal mixer. Compound UV can make the film have excellent anti-aging properties; The long and short effect flow drops can make the film form a uniform and transparent water film on the surface, which can increase the light transmittance and avoid water drops; The compound heat preservation agent can prevent the temperature in the shed from falling too fast at night and make the temperature in the shed 1 ~ 3 ℃ higher than that of the ordinary membrane.

2、 Product characteristics

1. Drip proof for more than 3 months;
2. Anti aging performance for more than 12 months;
3. The film has high transparency.

3、 Technical parameters

project

Numerical value

Test method

Appearance

3×3mmSpherical, smooth surface

Visual inspection

Main content

32%

Measured

Density

0.96g/cm3

GB/T 1033

Melt index(2.16kg/190℃)

8g/10min

GB/T3682-2000

Volatile matter(105℃/2h)

≤0.5%

GB/T 24131-2009

Heat resistance

200-300℃

GB/T 1035-2000

 

4、 Product application

1. Suitable for EVA, PE greenhouse film;
2. Recommended addition ratio: about 10%. The specific addition amount can be added according to the performance requirements of the final product.
If it is three-layer co extrusion, it is generally added to the middle layer and inner layer.

 

5、 Packaging and storage

Package: 25kg / bag, moisture-proof paper plastic composite bag,
Storage: the storage period is one year, and pay attention to moisture protection.
Usage Note: if it is used after one year, first test whether it absorbs moisture. If it absorbs moisture, it will not affect the effect after drying.

Customer message


Submit

New Products